Houston, TX, United States, 16th Sep 2026 — Process Solutions International (PSI) builds its MAX2000 mud agitators around a drop bearing design created specifically to handle the shaft deflection that occurs in deep tanks, a problem that shortens the service life of agitators built without this feature. The design lets crews maintain the bearing from the top side of the tank instead of draining or entering the vessel.

Solving a Deep Tank Problem

PSI’s mud agitators use a rugged drop bearing casting that bolts directly to the top of the tank without requiring an additional supporting structure. Oversized high-capacity taper roller bearings absorb the radial and axial loads that come off the impeller shaft, and the units use common output flange dimensions so operators can drop in a replacement at an existing installation without reworking the tank. Every agitator is built around a reinforced cast iron gear case housing helical bevel gearing, with gears precision ground and hardened to keep backlash low and let thermal capacity exceed torque capacity. A sight glass lets an operator check lubrication levels without removing any components, and a keyless bushing gives a full range of impeller depth settings on the shaft.

Built for Hazardous Locations Worldwide

PSI configures its motor and gearbox combinations to meet UL, ATEX, and IECEx requirements, so the same agitator platform can be installed in classified hazardous areas across the United States, the Middle East, and other international markets without a separate design for each region. Operators can also choose between hydrofoil impellers, which move fluid in an axial flow, or canted blade impellers, which produce a combined radial and axial flow, in either carbon or stainless steel.

“Shaft deflection is one of the most common reasons agitators fail early in deep tank service. We engineered the drop bearing specifically to solve that problem and to be serviced from the top, without asking a crew to enter a tank,” said Kye Keliehor, representative of Process Solutions International.

PSI has been designing and manufacturing its mud agitators alongside its centrifugal and progressive cavity pump lines since 1991.

About Process Solutions International

Process Solutions International (PSI) has been manufacturing industrial equipment since 1991. Based in Houston, Texas, with a secondary location in Midland, Texas, PSI designs and builds pumps, mud agitators, gas management systems, material handling equipment, and cleaning and filtration systems for the oil and gas, construction, mining, and industrial sectors. PSI holds ISO 9001, UL, ATEX and IECEx, and CEMA certifications and operates the MAX2000, MAKDADDY, and vAK product brands.

Learn more at:

Facebook: https://www.facebook.com/processsolutionsinternational

LinkedIn: https://www.linkedin.com/company/process-solutions-international/

Media Contact

Organization: Process Solutions International

Contact Person: Kye Keliehor

Website: https://psimax2000.com/

Email: Send Email

Contact Number: +12818934774

Address: 7519 Prairie Oak Dr

City: Houston

State: TX

Country: United States

Release id: 49194

The post PSI Mud Agitators Engineered to Prevent Shaft Deflection appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

Dubai, UAE, September 16th, 2026, ZEX PR WIRE – Zameera, a global ultra-luxury travel company curating extraordinary experiences for ultra-high-net-worth clients, and PayitFast, a digital payments platform, today announced the signing of a Memorandum of Understanding between Zameera and Verati, PayitFast’s dedicated lifestyle and concierge platform.

The partnership will bring a curated selection of Zameera’s ultra-luxury travel experiences to PayitFast members through Verati, giving members access to unique destinations and rare-access adventures. The initial selection includes some of Zameera’s most distinctive journeys, among them a private safari camp on Kenya’s Maasai Mara, a heli-skiing week beneath Iceland’s midnight sun, and a two-part journey through Saudi Arabia’s Red Sea coastline, each one reflecting the same standard of curation the Zameera name is built on.

The agreement reflects a broader shift in how premium digital platforms extend value to their members, moving beyond payments and rates toward genuine, curated access. Through Verati, PayitFast members can access something historically reserved for private banking relationships and personal introductions. For Zameera, it opens a new, high-intent distribution channel.

The companies will work together on platform integration, service onboarding, and joint marketing initiatives in the lead-up to launch, applying their respective standards to ensure a seamless client experience from discovery through to booking. The partnership will be delivered through Verati and made available to PayitFast members as part of the broader PayitFast ecosystem. 

“Ultra-luxury travel has always depended on trust, on knowing that what you are being offered has actually been vetted by someone with real judgment. Bringing our catalogue to PayitFast’s members means extending that same standard to a new audience of high-net-worth clients, exactly the traveler Zameera was built for,” said Sebastian Taskila, Chief Executive Officer of Zameera.

“At PayitFast, we are building an ecosystem that delivers meaningful value beyond payments. Through Verati, we are bringing together exceptional travel, hospitality and lifestyle partners to create unique experiences for our members. Zameera’s reputation for curating world-class journeys makes them a natural partner, and we are excited to make these experiences available to our growing member base,” said Catherine Thin Nwe Nyein, Group Partnership Director of PayitFast.

Both companies will share further details on member access and launch timing in the coming months as the integration progresses.

About Zameera

Zameera is a global ultra-luxury travel company headquartered in Dubai, curating extraordinary experiences for ultra-high-net-worth clients around the world. Its portfolio spans private island buyouts, fully private polar expeditions, exclusive safari camps, and rare-access journeys across the Maldives, Saudi Arabia, Antarctica, Indonesia, the Arctic, Kenya, Rwanda, and beyond, each experience selected to the standard of the world’s finest luxury houses.

About PayitFast

PayitFast is a digital payments platform enabling digital assets and traditional fiat payments built for retail and corporate customers. PayitFast is a trading name of Silverleaf E-Money Services LTD, Canada, an authorised Money Services Business (MSB) and Payment Services Provider (PSP) by FINTRAC and Bank of Canada. PayitFast offers lifestyle concierge services through Verati, its dedicated concierge platform operated in Dubai. PayitFast lets members hold, spend and send across currencies through its app and card, and serves businesses with cross-border collections, payouts and invoicing. Verati brings curated travel and experiences into the same app, with Zameera joining as a founding experience partner. Through Verati, PayitFast continues to expand its network of travel, hospitality, lifestyle and concierge partners, providing members with access to curated experiences alongside its payments and financial services ecosystem.

This article is an announcement of a strategic partnership between PaytiFast, Verati and Zameera and is provided for informational purposes only. Nothing in this article should be construed as a solicitation, offer, or invitation to customers in any jurisdiction where PayitFast is not duly authorised or licensed to provide its services. PayitFast operates only in jurisdictions where it holds the necessary regulatory authorisations.

Rosh Pinna, Israel, September 16th, 2026, FinanceWire

• Letter of Intent (“LOI”) signed to cooperate in the evaluation, research support, localization, commercialization preparation and regulatory preparation of the PressureSafe medical device in Japan.
• Collaboration addresses a significant potential market need in Japan, which includes more than 36 million people aged 65 and older and approximately 8,000 hospitals, 13,600 long-term care facilities, and 16,000+ home-visit nursing stations.
• Strategic collaboration combines IR-MED’s infrared spectroscopy technology and proprietary algorithm with Dice Technologies’ capabilities in coordinating clinical evaluation, localization and regulatory preparation activities in Japan.
• Clinical research and evidence-generation activities are expected to include cooperation with the Department of Plastic Surgery at Kobe University, subject to required ethics review, institutional approvals and separate written arrangements.

IR-MED Ltd. (OTC: IRME) (the “Company” or “IR-Med”), developer of infrared spectroscopy-based medical device technology,, and Dice Technologies Co., Ltd., a leading Japanese healthcare digital transformation and medical IT provider, today announced the signing of a LOI. The LOI sets forth a framework for the parties to cooperate in the evaluation, research support, localization, commercialization preparation and regulatory preparation of IR-MED’s PressureSafe device for the Japanese market. Except for certain provisions relating to confidentiality and data protection, intellectual property rights, and device management, return and disposal, the LOI is not intended to create legally binding obligations between the parties.

Ultimately, the partnership is driven by a shared, transformative vision: Build pressure-injury prevention platform — device, AI, and EHR systems unified across hospitals, LTC, and home care nation wide

The parties intend to evaluate PressureSafe for use in hospitals, long-term care facilities and home healthcare settings in Japan, with a focus on supporting the assessment of early signs of pressure injuries.

PressureSafe is a medical device that uses infrared technology to support the assessment of early changes associated with pressure injuries and skin conditions. It provides real-time, on-site, non-thermal and blood-flow-related indicators intended to support, and not replace, the clinical judgment of nurses and physicians. PressureSafe combines infrared spectroscopy with a proprietary algorithm and is intended to support the assessment of early signs of pressure injuries.

Market Need in Japan

Japan is facing an unprecedented demographic and systemic challenge. With an aging population of 36.19 million individuals aged 65 and older (29.4% of the total population), national care expenditures have reached a record ¥11.94 trillion. Concurrently, the healthcare sector is bracing for a projected shortage of hundreds of thousands of nurses and approximately 300,000 care workers.

This convergence of an aging population and severe workforce shortages has driven a significant increase in the prevalence of pressure injuries—particularly in the rapidly growing home care sector, which reports a 1.93% prevalence rate. To address this, Japan requires scalable, technology-assisted care solutions across its approximately 8,000 hospitals (1.2 million beds), 13,600 long-term care facilities (1.0 million residents), and 18,042 home-visit nursing agencies.

A complementary Strategic Synergy

The collaboration between IR-MED and Dice Technologies represents a highly complementary alignment of technological innovation and domestic operational mastery.

• The Technology & Science Engine (IR-MED): IR-MED brings its proprietary PressureSafe sensors, predictive AI algorithms, and a foundation of global clinical data. The technology addresses the crucial “Layer 1” of early risk assessment—sub-epidermal tissue health—providing objective metrics to a field that has historically relied on subjective visual observation.
• The Domestic Commercial & Integration Leader (Dice Technologies): Dice Technologies will lead and coordinate the evaluation program in Japan. Leveraging an established nationwide footprint serving over 1,000 clinics well-distributed across Japan, Dice Technologies will support Pharmaceuticals and Medical Devices Agency (“PMDA”) consultation preparation and regulatory communications in Japan.. Crucially, Dice Technologies bridges the gap between device and daily workflow by integrating PressureSafe data into its existing CareNest platform and domestic Electronic Health Records (“EHR” ), creating a seamless data flow from the hospital to the patient’s home.

Phased Rollout and Clinical Validation

The partnership will execute a highly structured, reverse L-shaped Go-to-Market strategy. The initial phase will focus on real-world evaluations in long-term care (“LTC”) and home-visit settings to generate clinical utility data and user feedback.

Simultaneously, the partners will advance rigorous clinical research and PMDA consultation to support the regulatory pathway for PressureSafe in Japan. This validation process will be bolstered by anticipated cooperation with Japanese clinical leaders, including the Department of Plastic and Reconstructive Surgery at Kobe University, subject to required ethics review, institutional approvals and separate written arrangements.

Executive Commentary

Ken Ishiga, President and Representative Director of Dice Technologies Co., Ltd., stated, “Japan’s care crisis cannot be solved with isolated tools. We must unify prevention, observation, and discharge support. By combining IR-MED’s extraordinary ‘sensing the invisible’ technology with our EHR integrations and CareNest platform, we are delivering on our shared vision to build a continuous, patient-centered care infrastructure that supports our overstretched healthcare workforce over the long term.”

“Entering the Japanese market requires more than just groundbreaking technology; it requires a deep integration into the local care ecosystem. In Dice Technologies, we have found the perfect partner,” said Dr. Yaniv Cohen, Interim CEO and Chief Scientific Officer of IR-MED. “Their expertise in medical IT, their impressive footprint serving over 1,000 care facilities, and their ability to navigate PMDA regulations make them the ideal catalyst for PressureSafe. Together, we are not just evaluating a device; we are working toward a new national standard for objective, preventive care.”

About IR-MED Ltd.

IR-MED Ltd. is developing a cutting-edge infrared spectroscopy and AI analysis platform technology as a basis for point-of-care decision support devices. The infrared spectroscopy technology allows harmless and non-invasive gathering of bio-information from patient blood and tissue. That data is then processed by the Company’s AI-based system to provide healthcare professionals with decision support in the assessment of various medical conditions. PressureSafe, the Company’s lead platform product, is a handheld device designed to revolutionize the assessment of pressure injuries (PI) affecting skin and underlying tissue regardless of patient skin tone. IR-MED holds patents protecting its innovations in non-invasive tissue assessment.

For more information, visit: https://www.ir-medical.com/

About Dice Technologies Co., Ltd.

Based in Osaka, Japan, Dice Technologies Co., Ltd. specializes in comprehensive digital solutions optimized for clinics, hospitals, and welfare facilities. Backed by a strong national footprint encompassing over 1,000 clinics well-distributed across Japan, the company streamlines healthcare workflows through advanced medical IT systems, seamless electronic medical record (EMR) migrations, medical device distribution, and innovative home assessment applications. Dice Technologies leverages technology and community partnership to reduce operational burdens and build a sustainable healthcare future.

For more information, visit: https://d-technologies.co.jp/

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and other federal securities laws. Statements that are not statements of historical fact, including statements regarding the timing and success of the strategic partnership, the activities contemplated by the LOI, the clinical evaluation results, PMDA regulatory consultations and classification, and commercial acceptance of PressureSafe in Japan, are forward-looking statements. These statements are based on management’s current expectations and are subject to risks and uncertainties that could cause actual results to differ materially, including regulatory delays, the non-binding nature of most provisions of the LOI, clinical trial outcomes, competition, and general economic conditions. IR-MED undertakes no obligation to publicly update or revise any forward-looking statements.

Sources:

Statistics Bureau of Japan, Statistical Topics No.146 (published 14 Sep 2025) / MHLW, “Japan’s Population” / MHLW, Report on the Status of Long-Term Care Insurance (Nov 2024) / MHLW, Survey of Long-Term Care Benefit Expenditures FY2024 (published 30 Sep 2025) / MHLW, Survey of Institutions and Establishments for Long-Term Care 2024 (published Dec 2025) / MHLW, Survey of Medical Institutions and Hospital Report 2024 (published 26 Sep 2025; confirmed figures as of 1 Oct 2024)

Investor & Media Contacts:

IR-MED Ltd. Investor Relations Email: contact@ir-medical.com

Website: https://www.ir-medical.com/

Dice Technologies Co., Ltd.

Website: https://d-technologies.co.jp

Contact

IR-MED Ltd. Investor Relations
contact@ir-medical.com