Connect with us

Press Release

Kingbull Launches an Unstoppable All-Terrain eBike Rover 2 With Torque Sensor and Samsung Battery

Published

2 weeks ago

on

Los Angeles, CA, United States, 2nd Sep 2025 – Kingbull has unveiled a new fat ebike, the Rover 2.0. This bike brings together power, range, and comfort in one sleek, sturdy package. It has a rugged frame, a robust Bafang motor, a reliable Samsung battery, and a full suspension system that enables it to conquer every terrain.

The Rover 2.0 is suitable for riders who want one bike for both road and track. It has the power to handle even the steepest of climbs, the range for daily use, and the stability to stay firm on gravel, soft ground, rocks… or wherever you take it.

Motor

The Rover 2.0 uses a 750W brushless hub motor from Bafang(GD). The motor propels the rear wheel and produces 80Nm of torque while also promoting energy efficiency. It generates ample power, allowing the bike to reach 28 mph in Class 3 mode. However, you can also switch it to Class 2, by setting the speed limit to 20 mph via display unit.

The motor doesn’t lose performance under heavy loads or when tackling steep ascents. The Rover 2.0 supports up to 400 lbs, and the bike continues to climb without losing drive even when it’s fully loaded.

Battery

The Rover 2.0 is fitted with a 720Wh Samsung battery. The bike has been tested for a maximum range of 60 miles. In everyday use, the figure may get close to 40 miles under heavy loads, or in uphill rides, or when higher assist levels are used. 

The battery is placed inside the frame which shields it from water and dust. But it can also be removed if charging indoors is preferred. A complete charge with the provided 3.0A smart charger takes about 5 hours.

PAS Sensor

The Rover 2.0 uses a torque sensor that responds to how much pressure you put on the pedals. This makes the ride feel more natural. Instead of sudden bursts of power, the motor gives support that matches your effort.

The sensor also plays a role in saving battery power. Since it adjusts output based on your pedaling, the motor does not waste energy when it is not needed. For riders, who use mid assist levels, this can significantly extend the range. 

Suspension

The Rover 2.0 uses a full-suspension layout. The in-house front fork offers 100 mm travel, lockout, and preload adjustment. At the rear, the DNM DV-22AR oil-spring shock gives 45 mm travel with adjustable damping. 

Effectively, this means no terrain is inaccessible to riders. The fork soaks front bumps well and the rear shock helps keep control when the trail gets tough. This suspension setup lifts the overall ride quality and makes it comfortable and steady across varied terrain.

Tires

The Rover 2.0 comes with 26″ × 4.0″ CST puncture-proof fat tires. These tires give you confidence to ride on sand, mud, dirt, or track. Their increased width gives a bigger footprint on the ground which helps promote balance, even at lower speeds. 

These tires make the bike more versatile than a standard ebike. The combo of massive fat tires and dual suspension means you can conquer the tracks that are off-limits for other riders. 

Transmission

The Rover 2.0 is fitted with a Shimano 7-speed drivetrain. The shifts feel simple and steady which helps keep the ride smooth. Riders can switch to lower gears for climbs and higher gears for faster sections.

Also, the drivetrain matches well with the motor output. It provides reliable power transfer and helps the bike stay efficient across different speeds. Both on and off-road riders will find the drivetrain functional and easy to use.

Brakes

The Rover 2.0 uses ZOOM HB-875-E hydraulic disc brakes with dual pistons and 180 mm rotors on both wheels. These brakes generate strong and precise stopping power, enabling you to stop the instant you want to stop. They particularly respond well on steep or loose terrain.

The brake levers include motor cut-off (power-off) sensors. When you pull the brakes, the motor stops immediately to give you better control and to avoid sudden surges. 

Display

The Rover 2.0 comes with a KB35H custom color backlit display. It clearly shows speed, battery level, pedal-assist mode, distance covered, and other ride metrics even in full daylight. The horizontal layout of the screen is also well designed. It helps riders glance at data without needing to slow down. 

Frame

The Rover 2.0 has a sleek all-aluminum frame that promises both strength and lightness. The material is aircraft-grade to give the bike a solid feel while also keeping its weight manageable… at 80 lbs. To ensure ergonomic fit for riders of various heights (5’6″ to 6’5″), the seat post is height adjustable.

The design includes an integrated battery that sits inside for a clean look. The cables also run inside to ensure a neat exterior and to prevent damage. Thanks to the step-thru design, every rider can easily mount or dismount the bike. As for the colors, the bike is currently available in either pure black or sand silver.

Lights

The Rover 2.0 has a 48V LED headlight and a rear light that activates when the brakes are applied. The headlight gives a wide beam that helps enhance visibility and safety on darker paths, while the rear light alerts traffic or riders behind you. 

Accessories

This bike comes with a set of useful add-ons that make it ready to ride out of the box. These include a cable lock, an air pump, and a phone mount. The bike also comes with a sturdy kickstand, an electric horn, and a plush eco-leather saddle. 

Warranty

The Rover 2.0 comes with a 2-year warranty for the frame and electronic components (battery, motor, sensors and controls). Riders can have full peace of mind, as instant support is available for any issues that may come up in the initial years of use.

Pricing

The Rover 2.0 is meant to conquer trails, and is suitable for riders who value long range, smooth control, and reliable build quality. It doesn’t cut back on features or build quality, and comes with branded components. The bike’s capability is practically unmatchable, thanks to its sturdy frame, rugged tires, dual suspension, and hydraulic brakes. 

As for the pricing, the Rover 2.0 currently retails at $1,399, with shipping included. However, buyers who purchase more than one bike will get an extra $200 off. For more details, please visit: Kingbull Rover 2.0.

About Kingbull

Kingbull is a leading manufacturer of fat-tire ebikes, designing versatile rides for people who want one bike for both city streets and rugged trails. Every model from Kingbull features super-sturdy frames, 4” fat tires, and top-notch suspension systems for all-terrain capability.

Kingbull stands out by including components only from top brands, including Samsung, Bafang, Tektro, and Shimano to name a few. The lineup starts at $999 and includes folding, commuter, full-suspension, and cargo e-bikes to cater to every type of rider.

With more than 20,000 riders and 1,450 reviews averaging 4.86/5.0, Kingbull has earned a strong reputation for both reliability and performance.

Media Contact

Organization: Kingbull Technology, INC.

Contact Person: Ethan Doo

Website: https://www.kingbullbike.com/

Email:
ethan.doo@kingbullbike.com

Contact Number: +12135884335

Address:5101 Santa Monica Boulevard

City: Los Angeles

State: CA

Country:United States

Release id:33301

The post Kingbull Launches an Unstoppable All-Terrain eBike Rover 2 With Torque Sensor and Samsung Battery appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Cloud PR Wire

See author's posts

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Related Topics:
Continue Reading

Press Release

Solana Token Creator Launches as a New Platform for Rapid Token Creation on Solana

Published

3 hours ago

on

September 13, 2025

By

United States, 13th Sep 2025 – The blockchain industry continues to grow at an unprecedented pace, and launching a custom token is now easier than ever. A new platform, Solana Token Creator, has officially launched, offering a seamless solution for creating SPL tokens on the fast and cost-efficient Solana network.

Designed for creators, communities, and startups, Solana Token Creator allows users to build and deploy their own tokens within minutes—without the need for coding or complex technical setups.

Streamlined Token Creation Process

Solana Token Creator simplifies token deployment through a guided four-step process:

  • Select Token Type: Choose between Standard, Meme, or Utility tokens depending on your project’s needs.
  • Add Basic Information: Enter your token name, symbol, and a brief description.
  • Configure Advanced Settings: Set supply, decimal places, and authority permissions.
  • Deploy Instantly: Launch your token in seconds once all settings are confirmed.

Users can begin creating tokens directly at https://www.solanatokencreator.fun

Supported Token Types

The platform supports three main token categories tailored for different use cases:

  • Standard Tokens – Ideal for governance systems, utility tokens, or business projects; supports custom metadata, authority control, and token burning.
  • Meme Tokens – Created for viral campaigns and community-driven experiments; designed for rapid social engagement.
  • Utility Tokens – Best suited for DeFi applications, staking mechanisms, and advanced blockchain projects; includes complex authority roles and flexible supply control.

Professional-Grade Features

Beyond basic token creation, Solana Token Creator offers several advanced features:

  • Instant Deployment: Launch tokens within seconds.
  • Custom Branding: Add a logo, description, and social media links.
  • Governance Tools: Enable voting and proposals for DAOs.
  • Token Burning: Reduce supply to create scarcity.
  • Authority Controls: Manage minting and freezing permissions.
  • Secure Infrastructure: Built on the Solana blockchain, ensuring low fees and high-speed transactions.

A complete list of features is available at Sol Token Creator

Designed for a Wide Range of Users

The platform is suitable for:

  • Entrepreneurs launching branded tokens for their businesses
  • DeFi developers who need utility tokens quickly
  • DAOs and communities creating governance tokens
  • Content creators experimenting with viral meme coins

Its intuitive interface makes token creation accessible to beginners, while still offering advanced customization options for experienced developers.

Empowering the Next Generation of Token Creators

Solana Token Creator lowers the barrier to entry for token development by removing the need for coding knowledge and streamlining the entire deployment process. This makes it an ideal solution for projects looking to launch tokens quickly, securely, and at a low cost.

For more information or to start building a token, visit https://www.solanatokencreator.fun

Media Contact

Organization: Solana Token Creator

Contact Person: Edgardo Runte

Website: https://www.solanatokencreator.fun/

Email: Send Email

Country:United States

Release id:33817

Disclaimer: This press release is for informational purposes only and does not constitute investment, financial, or legal advice. Cryptocurrency and blockchain projects involve risk, and readers should conduct their own research before participating.

The post Solana Token Creator Launches as a New Platform for Rapid Token Creation on Solana appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Cloud PR Wire

See author's posts

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

OpenQQuantify Builds International Platform With 3000 Engineers to Democratize Electronics Development

Published

3 hours ago

on

September 13, 2025

By

Canada, 13th Sep 2025 – OpenQQuantify, an international company operating in Canada, the United States, and Europe, today announced new milestones in its mission to provide communities worldwide with the tools to design, simulate, and source the technology they need. The company, led by founder and business consultant Paul Savluc, has built a platform that empowers engineers, organizations, and local communities to take control of their technological development processes. Paul Savluc is an international business man that operates within the USA, Canada, United Kingdom, Europe, Middle East, Africa, and Asia bridging technology gaps all throughout the world. Paul Savluc & OpenQQuantify help engineers build a better society.

Over the past two years, Paul Savluc has personally trained and guided more than 3,000 engineers, working collaboratively to build a digital infrastructure that is “by the community, for the community.” This effort underscores OpenQQuantify’s broader commitment to democratizing access to advanced technology and engineering resources.

Addressing Global Needs Through Engineering and Simulation

As industries worldwide grapple with the accelerating pace of digital transformation, OpenQQuantify offers a practical solution for groups that lack access to sophisticated R&D environments. The platform enables users to:

• Develop innovative technologies from inception to completion.

• Use digital simulation to verify the viability and functionality of prototypes prior to manufacturing.
• Source parts from throughout the world to guarantee price and accessibility.

Instead, depending on pre-packaged solutions, these skills enable communities from small enterprises to research collectives and charitable organizations to create technologies that are specific to their requirements.

”Paul Savluc, Founder of OpenQQuantify said,

“Technology should serve people where they are, not the other way around. By combining engineering expertise, simulation capabilities, and a global sourcing network, we’re making it possible for communities to create tools that fit their realities. The goal is empowerment, allowing anyone, anywhere, to move from idea to execution.”

Expanding Impact Beyond Engineering

In addition to technology development, OpenQQuantify is increasingly involved in business consulting and advanced R&D initiatives, helping companies and organizations adapt to rapid changes in the global marketplace. Paul Savluc and his team provide support across areas such as:

  • Business development strategy.
  • Scaling technology from pilot stage to international deployment.
  • Connecting innovators with partners across continents.

OpenQQuantify also owns news networks spanning every continent, positioning the company to support both business development and marketing efforts for clients seeking international visibility.

A Global Mission with Local Impact

The project comes at a time when both developed and emerging markets are finding it increasingly important to have access to dependable, locally relevant technologies. In addition to offering a technical solution. OpenQQuantify’s platform offers communities in resource-poor areas a route to self-sufficiency.

Community driven technology creation is becoming a viable strategy for innovation, according to industry observers. Businesses such as OpenQQuantify are contributing to the development of resilient global technology infrastructure by lowering reliance on centralized supply chains and establishing local testing environments.

 Collaboration as the Foundation of Leadership

Paul Savluc’s leadership is central to the platform’s growth. Over the last two years, his direct involvement with thousands of engineers has shaped a collaborative culture where contributions from diverse perspectives are encouraged. This approach, according to Savluc, is essential:

“No single company or individual can solve the world’s technology challenges alone. The progress we’ve made at OpenQQuantify is a result of thousands of engineers contributing their knowledge, experience, and creativity. The community built this, and the community benefits from it.”

Opportunities for Engagement

To encourage broader participation, Paul Savluc is currently offering free consulting meetings for a limited time. Business leaders, community organizations, and engineers interested in exploring how OpenQQuantify can support their goals can schedule a session through the company’s booking link:

https://calendly.com/openqquantifyexecutivemeeting/businessdevelopment.

About OpenQQuantify

OpenQQuantify is an international company registered in Canada, the United States, and Europe. The company provides a platform for engineering, simulating, and sourcing electronics with a mission to empower communities and businesses to create technology that meets their unique needs. In addition to its platform, OpenQQuantify offers business consulting services, advanced technology R&D, and international business development support.

For more information, visit: www.openqquantify.com.

Media Contact

Paul Savluc 
Founder, OpenQQuantify
Email: paul.savluc@openqquantify.com
Website: www.openqquantify.com
LinkedIn: https://www.linkedin.com/in/paul-savluc/

Media Contact

Organization: OpenQQuantify

Contact Person: Paul Savluc

Website: https://www.openqquantify.com/

Email: Send Email

Country:Canada

Release id:33842

The post OpenQQuantify Builds International Platform With 3000 Engineers to Democratize Electronics Development appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Cloud PR Wire

See author's posts

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

AWP Gaming Studios LLC Launches Okra Token – A Revolutionary Gaming Utility Token Creating Generational Wealth Opportunities

Published

3 hours ago

on

September 13, 2025

By

 

 

United States, 13th Sep 2025 – AWP Gaming Studios LLC proudly announces the launch of its groundbreaking cryptocurrency, the Okra Token, designed to transform both the gaming and investment industries. With unique royalty-based incentives, innovative gaming utilities, and long-term wealth-building opportunities, the Okra Token is set to become a global force in blockchain-powered entertainment.

At its core, the Okra Token empowers investors and gamers with the ability to earn 24/7 passive income through royalties generated on every transaction. Each time the token is transacted, a 6% transaction fee is distributed back to token holders, allowing investors to profit continuously. Unlike traditional investments, this model enables participants to secure income not only for themselves but for future generations, creating what the company describes as “generational income.”

A Token Built for the Gaming World

Unlike many cryptocurrencies that lack real-world application, the Okra Token is a true gaming utility token. AWP Gaming Studios LLC is integrating the token into multiple platforms that will engage and reward players, including:

  • Gaming Tournaments – Competitive online events where participants must use the Okra Token for entry fees, ensuring demand and circulation within the gaming ecosystem.
  • The Okra Shop – A unique giveaway platform where users can access exclusive opportunities, prizes, and rewards, all powered by entry fees paid in Okra Tokens.

This combination of utility and innovation ensures that Okra Token is not just another digital asset—it is a central component of a growing entertainment ecosystem.

Lifetime Royalties and Investment Potential

What sets Okra Token apart is its royalty-based model. By purchasing royalties, clients gain a permanent share of transaction fees across the token’s entire ecosystem. This means:

  • Earnings 24/7 – Every transaction, no matter the size or location, contributes to the holder’s income stream.
  • Scalable Growth – As adoption grows, the potential for returns increases, enabling some holders to earn hundreds to thousands of dollars per day in the future.
  • Generational Wealth – Royalties can be passed on, ensuring loved ones continue to benefit from this unique income structure.

“Okra Token isn’t just an investment—it’s an opportunity to create a financial legacy,” said Christopher Maxon, spokesperson for AWP Gaming Studios LLC. “By combining the rapidly expanding world of gaming with blockchain technology, we’re opening doors for players and investors to thrive together.”

AWP Gaming Studios LLC’s Vision

Founded in the United States, AWP Gaming Studios LLC is committed to redefining the way people experience gaming and digital investment. With the launch of Okra Token, the company’s mission is to bring together gamers, investors, and blockchain enthusiasts under one thriving ecosystem.

The token’s development reflects AWP Gaming Studios LLC’s belief that gaming should not only be a source of entertainment but also a platform for financial empowerment. By merging community-driven gameplay with crypto-based royalties, the company is laying the foundation for an innovative, long-term economic model.

Looking Ahead

With its early launch already generating buzz, Okra Token is positioned to attract both seasoned investors and newcomers eager to participate in the future of gaming finance. AWP Gaming Studios LLC is actively expanding partnerships and preparing large-scale gaming events to further showcase the token’s capabilities.

As more players join tournaments, engage in giveaways, and adopt the token across platforms, the demand and utility for Okra Token are expected to rise dramatically. For investors, this represents a rare chance to enter early into a market-ready token that is both fun and financially rewarding.

About AWP Gaming Studios LLC

AWP Gaming Studios LLC is an innovative gaming and technology company based in the United States. The company focuses on developing blockchain-powered entertainment solutions that combine gaming, cryptocurrency, and long-term wealth-building opportunities. Its flagship project, the Okra Token, reflects its mission to merge play and prosperity into one unified ecosystem.

Websites 

Media Contact

Organization: AWP Gaming Studios LLC

Contact Person: Michael Miller-Sales Manager

Website: https://okratoken.com/

Email: Send Email

Country:United States

Release id:33857

Disclaimer: This press release is for informational purposes only and does not constitute investment advice, financial advice, trading advice, or any other form of advice. Cryptocurrency and blockchain-based assets are volatile and involve significant risk, including the potential loss of principal. Readers should conduct their own research and consult with a licensed financial advisor before making any investment decisions.

The post AWP Gaming Studios LLC Launches Okra Token – A Revolutionary Gaming Utility Token Creating Generational Wealth Opportunities appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Cloud PR Wire

See author's posts

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

LATEST POST

Like Us
Follow Us
Subscribe Us
Follow Us