Connect with us

Press Release

An automotive OEM installed YANGLI presses line

Published

on

When you begin to look at a program to produce the best-quality automotive components at the highest yield rates—and throw a new material into the mix—there are a plethora of details to consider that will impact the end deliverable.

P76 LS4-7000

Press Considerations

If an OEM or tier stamper wants to install an automated system to stamp its large automotive components, it must first consider all the variables such as general press configuration, press stroke length, die space opening, interference points, speed, tonnage and energy required, and scrap removal.

 

Tandem or Transfer

The OEM or tier stamper must first choose the general press configuration, such as a transfer press or press-to-press line.

 

A transfer press requires all the components to be nested in the die before cycling the press. In a tandem line, the press can cycle once the individual component is nested in the die.

 

In a tandem line, the presses are synchronized by a variable press shift–typically 60 degrees from each other so that press 1 will reach bottom dead center first, then press 2 will reach bottom dead center 60 degrees later, and so forth. The press center-to-center distance should be as short as possible while still allowing press repairs and maintenance. This serves as a baseline for the press placement and all other component placement.

Press Stroke Length, Die Space Opening

The press stroke length and die space opening need to be big enough to allow the components to be loaded into the dies with stability. In most cases, that requires transfer automation with two arms, as well as a wide opening for the left-to-right die space.

 

If a single-arm transfer is used, such as a robot, the automation will cost less, including the cost for the left-to-right press opening, because it will be smaller, but the trade-off is a less stable component because it may need time to settle and stop bouncing before being placed into the die. Full control of the component during the transfer from die to die, under acceleration, deceleration, and G forces, becomes critical.

 

Speed, Tonnage, Energy

The required press speed, tonnage, and energy need to be enough to produce at the required rate, and the slide motion, such as a standard eccentric drive, link drive, or a servo-mechanical press, needs to be considered. All other variable slide motions and various interference curves that come into play to accommodate the optimal slide interference/displacement curve must be considered as well.

 

Interference Points

A review of automation integration into a press configuration should include looking at potential interference points, such as gib drip trays, oil return lines between the uprights, slide tracked vehicle tracks, control switch brackets, air automation valve connections, and bed-mounted equipment such as bolster clamps. If interference is encountered, the OEM or stamper needs to design around the interference or relocate it to permit the required clearance using a simulation tool.

 

Scrap Removal

In stamping operations, scrap removal often is an afterthought. It’s best to design ahead. Scrap shedding, both through the bolster and bed, as well as scrap doors on the front and back of the press are must-have design features.

 

Automotive OEM Case Example

An automotive OEM studied how to stamp its automotive body panels, such as hoods, doors, fenders, body sides, and many of the corresponding inner components. The parts were to be formed from both aluminum and steel.

图示, 工程绘图描述已自动生成

Beginning with the general press configuration for the body panels, the automaker chose to use a tandem line in the belief that this would be incrementally faster than a transfer press.

图示描述已自动生成

 

INS: http://instagram.com/yangligroup

Youtube: https://www.youtube.com/@yanglimachine

 

Company Name: YANGLI GROUP CORPORATION LTD

City,State,Country Address: YANGZHOU,JIANGSU,CHINA

Contact Person: ZHOU MENG

Email: zhou@yanglipress.com

Tel: 18652796644

Website: https://www.yanglipress.com

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Nostalgic Comeback Classic ICQ RockPaperScissors Game Reborn as NinjaRPS for Modern Mobile Players

Published

on

Retro messaging game reimagined with fast-paced ninja action, now available on iOS and Android

https://lh7-rt.googleusercontent.com/docsz/AD_4nXe8nf4QS74bAFzdiHDebOOTXEqvI1EO15SDyU98F5Q9REPNd874WkIKS8CSnsFfUVlIzUw3CZSV_7KLPoOK3UdarFVbvBhrppp4gmsXbH0WkD4X3ZjkukIONpr0YfTT6EUfBG94?key=5Ti9BTdjuXWyZwsRTbIefQ

Israel, 24th Jun 2025,  Long before emojis ruled conversations and mobile games flooded the app stores, there was ICQ, the chat app that quietly introduced one of the internet’s earliest multiplayer games: Rock-Paper-Scissors. Now, that simple but addictive mini-game is back, reimagined for a new generation as NinjaRPS, a sleek, action-packed remake for mobile, designed to hit right in the nostalgia.

Launched by NexEra Labs, NinjaRPS is now available on Google Play and the App Store, blending the familiar strategy of Rock-Paper-Scissors with the thrill of ninja duels, stylized animations, and retro-inspired visuals.

“We wanted to bring back something that felt personal, something people used to play between chats, just for fun,” said the developer. “NinjaRPS is our tribute to those early internet days, but with a new layer of energy and style.”

From Chatroom Classic to Combat Arena

NinjaRPS takes the core mechanics of the original ICQ game and wraps them in a fast-paced ninja theme. Players face off in animated duels where each move, Rock, Paper, or Scissors, triggers a ninja attack, block, or dodge. The game is easy to learn, hard to master, and endlessly replayable.

The game’s retro pixel art and fast-loading design are nods to the lightweight charm of the original ICQ era. At the same time, new features like avatar selection, local play, and unlockable content offer depth for today’s mobile gamers.

Download Now

NinjaRPS is free to play, with optional in-app features for customization.

Google Play: https://play.google.com/store/apps/details?id=com.nexeralabs.ninjarps&pli=1

App Store: https://apps.apple.com/il/app/ninjarps-rock-paper-scissors/id6468565440

Official Site: www.ninjarps.com

Built for Retro Fans & First-Time Players

Whether you remember playing RPS battles through ICQ in the early 2000s or you’re discovering it for the first time, NinjaRPS captures that same instant-fun energy. It’s a perfect pick-up-and-play game for casual moments, competitive challenges, or simply reliving a bit of digital history this time, with a ninja twist.

“Some games didn’t need a storyline, they just worked,” the developer added. “We brought that feeling back, but gave it flair.”

For media inquiry please contact NexEra Labs at:  info@nexeralabs.com

Media Contact

Organization: NexEra Labs

Contact Person: Press Team

Website: https://www.ninjarps.com/

Email: Send Email

Country:Israel

Release id:29729

View source version on King Newswire:
Nostalgic Comeback Classic ICQ RockPaperScissors Game Reborn as NinjaRPS for Modern Mobile Players

This content is provided by a third-party source. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release.

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

EPD Programme for Steel Industry Chain and EPD Networks Sign Strategic MOU to Advance Global Environmental Transparency

Published

on

U.S.-based EPD Networks has announced that it has signed a landmark Memorandum of Understanding (MOU) with the EPD Programme for Steel Industry Chain on June 19th to strengthen international cooperation in environmental product declarations (EPDs) across the global steel industry (source). This agreement marks a major step forward in aligning life cycle assessment methodologies, verification procedures, and environmental impact reporting on a global scale.

Under this strategic partnership, both organizations will pursue mutual recognition of key frameworks including General Programme Instructions (GPI), Product Category Rules (PCR), Life Cycle Impact Assessment (LCIA) methodologies, LCA tools, and verification checklists. The goal is to streamline EPD development and recognition across countries, enabling faster, more consistent environmental transparency for manufacturers and supply chain partners.

“This partnership will provide steel companies with a more efficient path to international EPD certification while accelerating progress toward shared climate goals,” said Hanbi Kim, Senior Manager at EPD Networks. “By bridging U.S. and Chinese expertise, we’re expanding access to credible, globally accepted environmental data.”

Key representatives present at the signing included Jiāngwéi, Deputy Secretary General of the China Iron and Steel Association; Noh-hyun Lim, Co-founder and General Manager of EPD Networks; and leaders from Ouyeel Corporation and the Institute of Global Sustainability Certification.

The EPD Programme for Steel Industry Chain is an organization organized by the China Iron and Steel Association and led by the Chinese steel industry, and was officially launched on May 19, 2022, with the participation of upstream and downstream steel industry enterprises, research institutes, and third-party organizations (source). 

To date, the programme has published 230 EPD reports and registered over 6,500 organizations—making it the world’s largest database for steel-related environmental performance. Its mission is to support carbon neutrality and low-carbon transformation by providing standardized life cycle data to all stakeholders.

EPD Networks, founded in 2023, is an independent certification body registered in the United States. It provides trusted environmental reporting solutions to companies operating in North America and Europe and is managed by experts from academia, manufacturing, and third-party verification.

For media inquiries or more information, visit www.epd-networks.com.

Media Contact

Organization: EPD Networks

Contact Person: Hanbi Kim

Website: http://epd-networks.com/

Email: Send Email

State: CA

Country:United States

Release id:29696

The post EPD Programme for Steel Industry Chain and EPD Networks Sign Strategic MOU to Advance Global Environmental Transparency appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Dondego Launches Real-Time Cultural Guide to Barcelona – A Daily Compass for Festivals Food and Local Life

Published

on

Barcelona, Spain –  Dondego, a leading Barcelona-based event discovery platform, has officially launched its newly enhanced real-time cultural guide, offering seamless access to the full range of the city’s dynamic events and cultural happenings. From iconic festivals to neighborhood art shows, the platform delivers a curated, up-to-date experience of Barcelona’s diverse local life.

Recognized as one of Europe’s most culturally rich destinations, Barcelona hosts an ever-changing calendar of events. The updated Dondego platform aims to simplify cultural navigation by showcasing major festivals, seasonal food markets, art installations, and more—organized by date, theme, and location.

“Barcelona’s culture is vibrant and ever-evolving,” said Isabel Romero, Head of Cultural Content at Dondego.es. “This platform was developed to serve as a reliable guide for discovering authentic and diverse experiences throughout the city.”

Highlights of Dondego’s Cultural Calendar

  • Major Festivals: Comprehensive listings include La Mercè, Primavera Sound, Sónar, Festa Major de Gràcia, and Sant Jordi Day.
  • Neighborhood Discoveries: Discover rotating cultural events across neighborhoods such as El Raval, Gràcia, and El Born, including street performances, underground music sessions, and community theater.
  • Gastronomic Listings: Features include curated food fairs, cooking classes, wine tastings, and local tapas routes.
  • Inclusive Cultural Access: Free exhibitions, museum nights, and open-air concerts are promoted to ensure cultural access for all.

Intuitive Navigation and Personalization

Dondego’s platform supports both advance planning and spontaneous exploration. The real-time interface allows filtering by neighborhood, category, and date. Each listing includes venue maps, curated descriptions, and cultural insights designed to enhance discovery.

About Dondego

Dondego is a cultural discovery platform dedicated to connecting audiences with the heartbeat of Barcelona. With daily updated listings across music, arts, gastronomy, and community events, Dondego offers streamlined access to the city’s authentic experiences. The platform’s mission is to promote meaningful engagement with local culture across all backgrounds.

Explore the guide: https://dondego.es/barcelona/eventos

Media Contact

Organization: Dondego

Contact Person: Alba Lomeli

Website: https://dondego.es/

Email:
bcn@dondego.es

Country:Spain

Release id:29630

The post Dondego Launches Real-Time Cultural Guide to Barcelona – A Daily Compass for Festivals Food and Local Life appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

LATEST POST