Connect with us

Press Release

Direct Drive Tech’s TITA Robot Camera Platform Captures Star Moments at 2026 Blue Dragon Red Carpet

Published

on

INCHEON, Korea South, 7th Aug 2026 – The red carpet is the most closely watched segment of the Blue Dragon ceremony, South Korea’s highest-profile annual honors for film and television and a principal showcase for its K-content industry. At the 2026 edition, staged in Incheon, Lim YoonA joined the actors and performers making their entrances before the assembled press. Working the lane alongside the handheld and fixed-position crews was Direct Drive Tech’s TITA wheeled-bipedal robot, introduced at the ceremony for the first time as a mobile camera platform and marking its first red-carpet assignment at an international awards event. TITA covered the arrival lane, the fixed photo area and the media interaction zone, contributing autonomous following, stabilized travel and multi-angle camera work.

Direct Drive Tech deployed its TITA wheeled-bipedal robot as a mobile camera platform on the 2026 Blue Dragon red carpet, supporting following shots, programmable camera moves and stable filming through a dense, fast-moving live-event environment.

Built on Direct-Drive Robotics: Direct Drive Tech Provides the Hardware Foundation for Professional Red-Carpet Filming

Camera movement is ultimately a torque problem, and that is where Direct Drive Tech has concentrated since its founding in 2020. The company builds gearless direct-drive motors, power modules, robot joints, sensors and actuators, an approach that removes conventional gear reduction from the joint, lowers backlash and yields the fine, continuous control a moving camera depends on. Its modular wheeled-bipedal robots were among the first of their type to reach volume production.

TITA was the platform used in Incheon. The 8-DoF machine combines an eight-degree-of-freedom joint layout, a proprietary balance algorithm and millimeter-scale environmental perception, giving it the travel speed associated with wheeled equipment and the adaptability associated with legged machines. It runs on an NVIDIA Jetson Orin NX 16GB module, carries a 10 kg moving payload, tops out at 3 m/s, climbs grades of up to 30 degrees, and works for roughly two hours per set of hot-swappable batteries. ROS 2, SDK and API access and the TITA Bridge expansion interface support development, and the same platform is used for inspection, mapping, security patrol, delivery experiments, education and secondary development.

Several of those attributes matter directly on a carpet. The direct-drive motors deliver generous peak torque while running quietly, which keeps the machine unobtrusive near live interviews. Modular mounting points accept professional cinema gimbals, high-definition camera bodies and additional sensing modules without a rebuild. LiDAR, stereo vision and TOF depth sensing let the robot map crowd movement as it goes and clear obstacles in real time. Mechanical heads and fixed tracks are constrained by the space they need and by how abruptly they start and stop; a self-balancing mobile base answers both constraints.

Multi-Scenario Deployment: TITA Supports Core Red-Carpet Camera Work at the 2026 Blue Dragon Event

Units were assigned to coordinated positions covering the three phases of the program: arrivals, the fixed photo area and the media interaction zone.

Dynamic Following Shots

The walk from the carpet entrance to the signature wall is hard to record as one continuous take when coverage depends on handheld operators and dolly positions. Switched into autonomous following, TITA held its subject through a combination of pre-loaded path and visual tracking, keeping pace with Lim YoonA (임윤아) as she walked the lane. The wheel-leg structure allowed slight lateral corrections around staff, fans and press crossing the lane, and the camera stayed level and stabilized throughout, producing a continuous point-of-view record for official coverage and for entertainment media in Korea and abroad.

Programmable Camera Movement and Cinematic Angles

Orbiting moves, push-in close-ups and slow motion are standard vocabulary at major awards ceremonies, and TITA’s programmable motion control accepts those trajectories in advance. Through the posing segment the robot circled talent at constant speed across a full 360 degrees, alternating rising and descending framing within the same pass. When Lim YoonA (임윤아) turned toward the cameras and raised a hand in greeting, it worked with high-speed camera equipment to capture high-frame-rate slow motion that holds detail in lighting, styling and garment movement. Selected clips were pushed to social platforms during the event, extending the reach of the ceremony’s red-carpet coverage.

Mobility in Tight Red-Carpet Spaces

Media positions and lighting rigs occupy both sides of the Blue Dragon carpet, and what remains is narrow. Camera dollies cannot advance into it and handheld operators lose sight lines behind the crowd. TITA’s compact body switches between two-wheel travel and a slower legged gait, which lets it thread the gaps between camera positions and take side-profile and low-angle frames that heavier equipment rarely reaches. Collision warning and emergency braking governed close-range work around talent, keeping the creative benefit and on-site safety in balance.

From Robotics Labs to Global Entertainment: A New Commercial Scenario for Direct Drive Tech

Mobile robot platforms built for industrial inspection, education and delivery experimentation are steadily finding work in film production, broadcast and large-scale live events, where autonomous navigation, repeatable motion and quiet operation answer requirements that conventional rigs meet with difficulty. Such events are also a strict testbed, permitting no downtime and no unpredictable behavior, and the operating data they produce feeds back into engineering.

That gives the Blue Dragon deployment relevance well beyond entertainment: to production teams and live-event producers assessing robotic camera support, to robotics developers and universities in search of a capable research base, to laboratories and inspection teams working in confined spaces, and to automation integrators building application-specific systems. TITA is offered as an open platform, with ROS 2 support, SDK and API access, modular expansion through TITA Bridge and documented interfaces for secondary development. Direct Drive Tech will continue advancing direct-drive robotics under real operating conditions, carrying its platforms from laboratories and industrial parks into a wider range of commercial and creative settings.

About Direct Drive Tech

Founded in 2020, Direct Drive Tech focuses on direct-drive robotics systems, wheeled robot platforms, direct drive motors and modular robot hardware, including robot joints, power modules, sensors and actuators. Its product line includes TITA, DIABLO, D1, the M15 Series and the M06 Series, serving robotics research, education, industrial inspection and commercial deployment. More information is available at https://shop.directdrive.com/.

Media Contact

Organization: Direct Drive Tech

Contact Person: Robotics BU

Website: https://shop.directdrive.com/

Email: Send Email

City: INCHEON

Country:Korea South

Release id:47840

The post Direct Drive Tech’s TITA Robot Camera Platform Captures Star Moments at 2026 Blue Dragon Red Carpet appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Valloy Unveils AI-Powered Digital Cutting Automation Solution DUOBLADE FX for Goods and Craft Production

Published

on

Valloy Incorporated is a company specializing in digital printing and finishing equipment, with businesses spanning software development and supply, computer printer manufacturing, and hardware trading. Its products include the DUOBLADE FX digital sheet-cutting solution, integrating digital printing and finishing technologies. Product and technical information is available at www.valloy.com. World-class 0.025mm precision meets intelligent automation, enabling unmanned production and a digital goods manufacturing environment built for non-expert users.

South Korea, 19th Nov 2026 – Valloy Incorporated (“Valloy”), a company specializing in digital printing and finishing equipment, announced it has significantly upgraded the software and cutting head of its digital sheet-cutting solution, DUOBLADE FX, setting a new standard for digital finishing automation.

The upgrade goes beyond improving raw cutting performance, focusing on automating the entire process from work-data generation to production setup, precision cutting and equipment-condition management. It is designed to make the product easy to use even for operators unfamiliar with professional design software, while reinforcing the stability of long, unattended production runs.

 DUOBLADE FX digital sheet-cutting unit

Full QR-Code Automation and 0.025mm Ultra-Precision Cutting

DUOBLADE FX is an intelligent digital cutting system that automatically recognizes a QR code printed on a job via camera, retrieves the cutting data required for that job, and proceeds with finishing without manual setup.

Its precision of 0.025mm — among the highest in the industry, according to the company — makes it suitable for producing high-quality stickers, labels and a range of goods that leave little room for cutting error.

Independently operating dual cutting heads also allow different operations, including die cutting and kiss cutting, to be performed simultaneously within a single production process, enabling complex finishing work without switching equipment or repeatedly reconfiguring the line.

Next-Generation GUI With Real-Time Control and a Smart Dashboard

The newly developed graphical user interface (GUI) significantly improves both operator convenience and production-management efficiency.

Operators can adjust cutting speed and pressure in real time while cutting is underway, allowing immediate responses to material characteristics or changing work conditions. Calibration, which previously required an experienced operator, has also been simplified through automated functions so that it can be carried out easily by any user.

A newly introduced smart dashboard analyzes the equipment’s operating logs to visualize machine status, job progress and blade condition in an intuitive way — letting operators grasp the current production status at a glance without navigating complex setting screens, and making equipment management and maintenance more efficient.

 DUOBLADE FX control interface — automatic mode, tool manager and calibration UI

An Intelligent Cutting Head That Manages Its Own Blade Wear

One of the most notable technologies in this upgrade is the newly developed next-generation cutting head, which features automatic blade-depth adjustment.

In typical digital cutting systems, cutting quality can decline as the blade wears down over extended use, requiring an operator to manually adjust blade depth to compensate. DUOBLADE FX’s new cutting head, by contrast, is designed to monitor blade wear during long, continuous operation and automatically correct blade depth accordingly.

The company says this represents a meaningful step beyond simple task automation toward an autonomous production system in which the equipment itself maintains cutting quality while minimizing the need for operator intervention — helping maintain stable cutting quality in unattended production environments such as overnight or holiday shifts, and reducing defects and equipment risk caused by blade wear.

An Era Where Anyone Can Produce Goods — No Illustrator Required

With this software upgrade, Valloy also focused on lowering the barrier to entry for digital finishing.

Producing stickers or goods previously required professional design software such as Adobe Illustrator to generate cutting data separately and arrange it to fit material size. DUOBLADE FX’s new software automates this process.

Users can automatically generate finishing data and have their work automatically arranged to fit the paper size, without going through a complex cutting-data creation process — making it possible for users without professional design or finishing expertise to easily produce stickers and other goods.

The company expects this to be a competitive advantage in a digital goods market increasingly defined by high-mix, low-volume production, by shortening setup time and reducing reliance on specialized personnel.

 Automatic layer recognition and path-optimization software screen

More Than a Cutter — Toward an Autonomous Digital Production Platform

Valloy’s ultimate goal is not simply to offer a fast and accurate cutting machine, but to integrate the entire production process — from data generation and material layout to job recognition, precision cutting, equipment-condition monitoring and blade-wear correction — into a single intelligent system.

The company said this DUOBLADE FX upgrade is a concrete step toward that vision, and expects it to mark an important shift for the digital finishing industry, from operator-centered production toward software-driven autonomous production.

A Valloy representative said:

“The core of digital finishing automation isn’t simply replacing human labor with machines. Users without specialized technical skills should be able to produce easily, the equipment should maintain its own optimal working condition, and production should continue stably without operator intervention. This DUOBLADE FX upgrade is an important step toward realizing that kind of fully autonomous digital production environment.”

 Sample goods produced with DUOBLADE FX

Valloy said it plans to continue integrating digital printing, cutting and finishing technologies and advancing intelligent automation to strengthen its competitiveness in the global digital label and goods production market. DUOBLADE FX — Beyond Cutting. Into Autonomy.  Precision. Intelligence. Automation.

Media Contact

Organization: Valloy Incorporated

Contact Person: Global Sales Department

Website: https://valloy.com/

Email: Send Email

Contact Number: +82260825022

Country: South Korea

Release id: 50780

View source version on King Newswire:
Valloy Unveils AI-Powered Digital Cutting Automation Solution DUOBLADE FX for Goods and Craft Production

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

My Wallet Introduces 1:1 Cross-Chain Stablecoin Swaps After Being Listed First on WalletConnect

Published

on

Dubai, United Arab Emirates, November 19th, 2026, Chainwire

My Wallet users can now receive a different stablecoin on another blockchain at a fixed 1:1 token rate on eligible routes, with no spread, slippage or swap fee charged by the wallet

My Wallet, a self-custodial, open-source crypto wallet serving more than 10 million users, has launched 1:1 swaps for USDT, USDC, USDe and USDS across supported blockchains. On eligible routes, users can switch both stablecoins and networks within a single in-app flow, with the amount they will receive fixed before confirmation. 

The launch follows My Wallet’s listing at the top of WalletConnect’s WalletGuide. The wallet is also WalletConnect Certified and connects users to more than 80,000 compatible apps.

Simplifying Stablecoin Transfers Across Blockchains

According to research published in October 2026 by Coinbase and The Block Pro Research, organic stablecoin transfer volume exceeded $400 million per hour during Q3 2026. Yet stablecoins operate across multiple blockchains and token issuers, creating friction when users need a specific token on a specific network. Even when funds arrive on the right network, users may still hold the wrong stablecoin for a payment, trade or application.

My Wallet addresses this through its in-app swap aggregator, powered by LayerZero, NEAR Intents, and other bridges resulting in the best rate. On eligible stablecoin routes, the aggregator offers a fixed 1:1 token rate, with no exchange-rate spread, slippage or My Wallet swap commission. My Wallet is the first among major crypto wallets to offer 1:1 swaps between different stablecoins across blockchains in a single in-app flow.

How the 1:1 Stablecoin Swaps Work

The fixed 1:1 rate can apply whether users switch to a different stablecoin or move the same token to another blockchain. On a supported cross-chain USDT-to-USDC route, for example, a user sending 10,000 USDT receives exactly 10,000 USDC. The same rate applies when the token stays the same: a supported transfer of 10,000 USDT from Ethereum to TRON delivers exactly 10,000 USDT on TRON.

The 1:1 option is available for swaps above $30 on supported routes. There is no exchange-rate spread, slippage or My Wallet swap commission. Applicable blockchain network fees are paid separately, and the exact destination token amount is shown before confirmation. Other routes may have different rates and fees.

“Stablecoins are supposed to make moving money simpler, but users still have to think about which token they hold and which blockchain it’s on,” said Alexander Zinchuk, founder of My Wallet. “We’re removing that friction. If you hold USDT and need USDC on another network, you should be able to make that change in one step, know exactly how many tokens you’ll receive, and not pay an additional swap commission to your wallet.”

Native Bitcoin and Gasless EVM Transfers

The stablecoin launch follows the introduction of native Bitcoin support in My Wallet. Users can hold, send, receive and swap BTC alongside assets on Ethereum, Solana, TON and other networks, as well as buy Bitcoin with a bank card or sell it for fiat through MoonPay.

My Wallet now supports gasless transfers on Ethereum, Base, BNB Chain, Arbitrum and Optimism, adding to the existing support on Solana and TON. For these EVM transfers, the network fee is deducted from the tokens being sent, so users do not need to acquire a separate native token for gas. Supported assets are USDC on all five EVM networks, USDT on Ethereum and BNB Chain, bridged USDT on Base and Optimism, and USDT0 on Arbitrum. There is no minimum transfer amount or daily limit on the number of transactions.

Together, these innovative features advance My Wallet’s broader “All You Need to Enjoy Crypto” vision, combining asset management, seamless trading, and ease of use into one self-custodial app.

The new features are already available in My Wallet. Swap availability is subject to the selected assets, networks and routes.

About My Wallet

My Wallet is a self-custodial, open-source multichain wallet for Bitcoin, Ethereum, Solana, Hyperliquid, TON, TRON, BNB, Base, Robinhood, Monad, Arbitrum, Polygon, and more. Founded in 2022, My Wallet serves over 10 million users across mobile, desktop, web and its Telegram Mini App. The wallet has been audited by CertiK and ranks among the top-5 wallets on CertiK’s Wallet Leaderboard.

My Wallet is WalletConnect Certified and currently listed 1st in WalletConnect’s WalletGuide, connecting users to more than 80,000 compatible apps.

Staking inside My Wallet is powered by Stakee, its own staking protocol, ranked among the top-2 TON DeFi protocols by TVL on DefiLlama.

For more details, users can visit mywallet.io and try My Wallet at mywallet.io/get. 

Join the community on Telegram, X, and Discord.

Contact

Irina Arons
irina.arons@mywallet.team

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Pooja and Phil by Bansi Pattni Debut Novel on Friendship and Second Chances Now Available

Published

on

Pooja and Phil is the debut contemporary fiction novel by London-based author Bansi Pattni, published by Quill Forge Publishing. Pooja Patel, the self-described black sheep of her British-Indian family, dreams of a West End stage. Philip Rivers, a driven company director, is forced to stop after an accident and face his past. When she becomes his personal assistant, an unlikely friendship begins. Now available in eBook, paperback and hardcover on Amazon.

LONDON, UK, 19th Nov 2026 – Quill Forge Publishing announces the release of Pooja & Phil, the debut novel by London-based author Bansi Pattni. A character-driven contemporary fiction novel set in modern-day England, it follows a 21-year-old British-Indian dreamer and a driven company director whose unlikely friendship changes both of their lives. Pooja & Phil is now available in eBook, paperback and hardcover on Amazon. It is also being made available on 40+ platforms, so readers can find it where they prefer to shop.

Pooja and Phil by Bansi Pattni Debut Novel on Friendship and Second Chances Now Available

About the Book: A Story of Friendship, Culture and Second Chances

Pooja Patel is the self-described “black sheep” of her British-Indian family. She has no university degree and works the tills at her local Tesco, while the community’s aunties compare her, not always kindly, with her doctor brother. Her heart belongs to dance and theatre, and her dream is to star in a West End musical celebrating South Asian culture.

Philip Rivers has built his entire life around ambition. When an accident leaves him unable to walk and rivals on his board begin circling, the company director who never slowed down is forced to stop and face the past he has been outrunning.

When Pooja becomes Philip’s personal assistant, two people who have each been hiding their pain slowly begin to see each other clearly. Told in alternating first-person voices across four parts (Acquainted, Face Off, Building Bridges and Not Ready to Say Goodbye), the novel asks what happens when the person who believes in you is the last one you expected.

Pooja & Phil is warm, candid and often funny, with real emotional weight beneath the humour. It is rich with Gujarati culture, from the comfort of Mum’s masala tea to the colour and joy of Navratri and garba.

Themes Readers Will Connect With

  • The weight of family and community expectations
  • The courage to pursue an unconventional dream
  • The loneliness of success and the cost of ambition
  • Vulnerability, friendship and facing the past
  • The legacy we leave behind

Who Will Love This Book

Readers of emotional contemporary fiction, unlikely-friendship stories, South Asian and British-Indian fiction, and stories about cultural identity and personal growth will find a lot to love in Pooja & Phil.

“I had been carrying this story for quite some time… I decided to take the leap of faith and continued writing the story with discipline until it was ready to be published.”

Bansi Pattni, from the acknowledgments of Pooja & Phil

About the Author

Bansi Pattni is a London-based lawyer and debut novelist whose story began taking shape in 2024. Despite early self-doubt, she committed to the process and brought Pooja and Phil to life on the page. She enjoys fiction that explores cultural heritage and human emotion. She also shares poems and essays on Substack and connects with readers on Instagram at @bansi_pattni.author. Learn more at www.Bansipattni.com or visit her Amazon Author Page.

Get Your Copy of Pooja & Phil

Buy Pooja & Phil on Amazon | Watch the official book trailer | Listen to the podcast interview with Bansi Pattni on YouTube

Book Details

  • Title: Pooja & Phil
  • Author: Bansi Pattni
  • Publisher: Quill Forge Publishing
  • Genre: Contemporary Fiction / Drama
  • Format: eBook, Paperback and Hardcover (Amazon, plus 40+ platforms)
  • Content note: Contains strong language
  • Buy: Amazon.com
  • Author Page: Amazon Author Page
  • Website: www.Bansipattni.com

About Quill Forge Publishing

Quill Forge Publishing is a UK-registered publishing services company with offices in London and Austin, Texas. It supports authors with book formatting, Kindle publishing and distribution so their stories can reach readers.

Media Contact

Bansi Pattni | www.Bansipattni.com

Review copies and interview requests available on request.

Media Contact

Organization: Quill Forge Publishing

Contact Person: Nick Williams

Website: https://www.quillforgepublishing.com/

Email: Send Email

Contact Number: +12145060709

Address: 5900 Balcones Drive STE 30493 Austin, TX 78731 TRAVIS COUNTY US

City: Austin

State: Texas

Country: United States

Release id: 50908

View source version on King Newswire:
Pooja and Phil by Bansi Pattni Debut Novel on Friendship and Second Chances Now Available

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

LATEST POST