Connect with us

Press Release

Fixerman Expands Its Dubai Repair Network with Dedicated Services for Electric Scooters, Apple Watch, and Gaming Consoles

Published

on

Dubai, UAE, 25th May 2026, ZEX PR WIRE — Fixerman, a leading electronics gadgets repair company based in Dubai, today announced the expansion of its service offering into three high-growth device categories: electric scooter repair, Apple Watch repair, and gaming console repair. The expansion reflects the company’s long-term strategy to build a comprehensive repair infrastructure capable of supporting the full breadth of consumer technology as it continues to evolve across the UAE.

As personal mobility devices, wearables, and next-generation gaming systems become increasingly central to daily life in Dubai and the wider region, the availability of reliable, specialist repair services has not kept pace with adoption. Fixerman’s expansion is designed to close that gap.

Expanding Urban Mobility Repair Infrastructure

Electric scooters have become an established mode of transport across Dubai, supporting everything from daily commuting and campus travel to last-mile logistics and recreational use. As fleet sizes and personal ownership continue to grow, demand for reliable technical repair support has risen correspondingly.

Fixerman’s newly launched electric scooter repair division addresses this gap with a comprehensive service scope covering both routine maintenance and complex technical failures across major brands. The company has also been appointed as the official UAE service partner for Pure Electric e-scooters.

The electric scooter repair division provides the following services:

  • Battery management system (BMS) diagnostics and repair

  • Charging system servicing and port replacement

  • Motor and controller board repair

  • Brake, tyre, and suspension servicing

  • Electrical diagnostics and wiring repair

  • Water and liquid damage treatment

  • Firmware troubleshooting and software support

  • Structural, frame, and body repairs

  • Preventive maintenance programmes

“Modern electric scooters are highly integrated electronic systems,” Amitabha Biswas, CEO of Fixerman noted. “Battery management systems, controller boards, firmware, motor assemblies, charging circuitry, and electrical diagnostics all require specialist handling — and proper diagnosis matters.”

Bringing Precision Wearable Repair to Dubai

The proliferation of Apple Watch across the consumer market has created a growing segment of users requiring reliable repair support for a category of device that demands an unusually high degree of technical precision.

Fixerman’s new Apple Watch repair service applies the same diagnostic-led repair methodology the company has established across its iPhone, iPad, and MacBook divisions to the wearable category. The service covers screen and display replacement, touch functionality restoration, and battery replacement across Apple Watch Series 4 through Series 9, Apple Watch SE, and Apple Watch Ultra.

The company notes that Apple Watch repair presents distinct technical challenges relative to other device categories, including compact internal architecture, delicate ribbon cable assemblies, adhesive sealing systems, and tightly integrated components, all of which require specialist handling to avoid further damage.

Specialist Support for Next-Generation Gaming Hardware

Gaming systems have evolved from consumer entertainment devices into high-performance computing platforms with sophisticated cooling, graphics, storage, and connectivity architecture. As repair complexity has increased, so has the need for technically qualified repair services.

Fixerman’s gaming console repair division supports PlayStation 5, Nintendo Switch, and Meta Quest VR headsets, among the most widely used gaming systems in the UAE today. The service scope includes:

  • HDMI port and display output fault diagnosis and repair

  • Overheating and thermal management system servicing

  • Charging system and power fault repair

  • Controller repair, including analogue stick drift correction

  • Software and firmware troubleshooting

  • Physical and liquid damage repair

The company emphasises a component-level repair approach that prioritises device restoration over replacement, reducing costs for customers and extending the operational life of gaming hardware.

Multi-Channel Service Delivery Across Dubai

Fixerman’s repair network is structured to maximise accessibility for customers across Dubai, with multiple service channels available depending on individual need and device category:

  • Walk-in service at Fixerman’s dedicated Dubai repair facility

  • Complimentary pickup and delivery service across the city for workshop-level repairs

  • On-site repair through the company’s FixerVan mobile repair service, allowing technicians to perform supported repairs at customers’ homes or offices without requiring devices to be left overnight

The FixerVan service, which gained significant attention since its launch for the convenience it provides to both residential and business customers, enables Fixerman to bring professional-grade repair directly to the customer location, minimising disruption and device downtime.

About Fixerman

Founded in Dubai, Fixerman is one of the UAE’s leading multi-device repair companies, providing diagnostic-first repair services across smartphones, laptops, tablets, gaming consoles, drones, printers, smartwatches, and enterprise IT equipment. The company also provides data recovery services and operates repair counters inside Virgin Megastore locations across Dubai. Fixerman’s repair philosophy centres on transparent diagnostics, component-level repair where viable, and minimising unnecessary device replacement.

Media & Service Enquiries

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Rent TRON Energy and Reduce USDT Fees : TronBid Expands Marketplace

Published

on

Berlin, Germany, August 26th, 2026, Chainwire

TronBid expands its two-sided TRON resource marketplace, giving users new ways to rent Energy, trade Energy and Bandwidth, and reduce USDT fees for TRC-20 transactions.

TronBid, a peer-to-peer marketplace for TRON network resources, has expanded its platform with new tools for users looking to rent TRON Energy, manage transaction costs and access network resources without maintaining large amounts of staked TRX.

The platform now operates as a two-sided marketplace where both buyers and sellers can create orders for TRON Energy and Bandwidth.

Understanding TRON Energy Usage

TRON uses Energy and Bandwidth as its primary network resources. Energy is required for smart-contract computation, including USDT TRC-20 transfers.

When a wallet does not have sufficient Energy, TRX may be consumed to cover the resources required by the transaction. This has created demand for users and businesses to rent Energy instead.

By receiving temporary Energy delegated from another account, users can perform eligible TRON transactions without maintaining enough staked TRX for their maximum resource requirements.

For businesses processing frequent TRC-20 transactions, choosing to rent TRON Energy can therefore provide another way to manage network costs and reduce USDT fees.

A Two-Sided Marketplace for Energy

Unlike platforms where rental conditions are determined entirely by the provider, TronBid allows both sides of the market to create orders.

Buyers can create BUY orders specifying the amount of Energy required, rental duration and price they are willing to pay.

Sellers can create SELL offers with their own amount, price and rental period. Buyers can purchase all or part of these offers directly.

For example, if a seller offers 600,000 Energy, one buyer can rent 350,000 Energy, leaving the remaining amount available for other buyers.

Creating a SELL offer does not reserve the seller’s Energy. If resources become unavailable because they are being used elsewhere, recurring offers can automatically pause and become active again when sufficient Energy returns.

This allows sellers to participate in the TronBid marketplace while continuing to manage their resources elsewhere.

Rent Energy Without Waiting for the Marketplace

For users who need resources immediately, TronBid also provides Quick Rent with predefined Energy packages and short rental periods.

Energy can be delivered directly to any specified TRON address, even when payment is made from another wallet.

TronBid has also introduced Flash Recharge, an alternative designed for wallets that already maintain their own Energy capacity but need to manage consumed resources.

Energy and Bandwidth Trading

TronBid’s marketplace supports both Energy and Bandwidth, allowing holders of staked TRX to monetize the network resources their stake generates.

This creates two sides of the ecosystem: users who need to rent TRON Energy or Bandwidth and resource owners looking to make unused capacity available to the market.

By allowing both buyers and sellers to determine their own terms, TronBid aims to create more transparent price discovery based on actual supply and demand.

B2B API to Reduce USDT Fees at Scale

TronBid also provides a B2B Quick Rent API for exchanges, payment processors, wallets, OTC services and other businesses processing frequent TRON transactions.

Businesses can maintain a prepaid balance and automatically request Energy for specified TRON addresses before executing transactions.

Instead of manually renting resources for every transfer, companies can integrate Energy rental directly into their transaction infrastructure.

For businesses handling large numbers of USDT TRC-20 transfers, this can make it easier to rent Energy automatically and manage the network-resource component of transaction costs.

TronBid Becomes a TRON SR Partner

Alongside the expansion of its marketplace, TronBid has become a TRON Super Representative Partner, adding the project to TRON’s delegated proof-of-stake governance ecosystem.

The development strengthens TronBid’s connection with the underlying TRON ecosystem while the platform continues building infrastructure around Energy and Bandwidth.

About TronBid

TronBid is a peer-to-peer marketplace for TRON Energy and Bandwidth. Buyers can rent TRON Energy, create BUY orders or purchase existing seller offers, while resource owners can create SELL offers with their own prices and rental periods.

The platform also provides Quick Rent, Flash Recharge and a B2B API for businesses looking to automate Energy rental and reduce USDT fees for TRC-20 transactions.

More information: https://tronbid.com

Contact

Petr Stoli
support@tronbid.com

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

ZFCHUNT Launches ZFC-X LiFePO4 Residential Battery Series, Cutting Solar Installer Labor by 15 percent

Published

on

The plug-and-play home solar battery storage system minimizes SOC discrepancies, helping contractors streamline setups in a market projected to reach $36 billion.

China, 26th Aug 2026 – ZFCHUNT, the global brand of Shenzhen Kangkedi Intelligent Technology Co., Ltd., today launched the ZFC-X Series, a new line of residential energy storage solutions. Engineered with durable LiFePO4 battery cells, the system reduces on-site installation labor by 15 percent and cuts State of Charge (SOC) estimation errors to under 2 percent.

The hardware arrives as Europe tightens building energy codes and U.S. contractors race to claim Inflation Reduction Act (IRA) incentives—both markets where every hour of on-site labor critically impacts project margins.

Key Facts & Technical Specifications

  • Installation Efficiency: Auto-detect CAN/RS485 protocols ensure instant compatibility with major hybrid inverters (SolarEdge, Huawei SUN2000, GoodWe), reducing setup time by up to 15 percent.
  • Durability: Features a 6,000-cycle rating, supporting up to 16 years of typical residential use backed by rigorous cell-screening protocols.
  • Safety Standard: Advanced thermal management minimizes thermal runaway risks during peak load operations.
  • Global Compliance: Fully certified under UL, FCC, CE, RoHS, and PSE standards, maintaining complete UN38.3 logistics documentation.

Core Technology and BMS Innovations

ZFCHUNT engineers its industrial-grade cell technology to minimize discrepancies between BMS software readings and real-world backup capacity. The core battery pack enclosure utilizes active cell-balancing and proprietary algorithms. This ensures that displayed SOC levels correspond more accurately to actual backup duration, reducing the risk of unexpected outages and extending overall cell life.

Streamlined Commercial Portfolio

While the ZFC-X Series focuses on the home energy storage market, ZFCHUNT’s 2,000-square-meter automated facility scales production for broader B2B needs. The company’s unified manufacturing pipeline supplies industrial lithium battery packs for continuous heavy-duty discharge, alongside consumer-grade lithium-ion batteries and OEM battery modules tailored for IoT devices, light green transportation, and telecommunications.

Global Supply Chain and Field Validation

Targeting global distributors and ODM clients, the factory accommodates a standard Minimum Order Quantity (MOQ) of 500 units. Delivery cycles range from 15 to 30 days, with custom samples dispatched within seven days. In recent field trials with European and U.S. installers, the standardized modules proved highly adaptable to diverse grid acceptance standards. Demonstrating a commitment to sustainable partnerships, ZFCHUNT provides detailed installation manuals, remote technical guidance, and a comprehensive three-year material warranty.

Management Quotes

“Most installers spend over three hours per system on inverter handshaking. We have reduced that to five minutes with CAN/RS485 auto-detection,” said Tan Chungen, Technical Manager at ZFCHUNT. “We cut installer labor costs by 15 percent—not just by making cost-effective hardware, but by making smarter systems. For North American and European contractors, where labor is the biggest project variable, that plug-and-play integration is a direct margin protector.”

Industry Background and Future Plans

Driven by global grid decentralization, the residential solar battery storage market is projected to reach $36.2 billion by 2030, according to Grand View Research. To maintain its technical edge, ZFCHUNT has completed A-sample prototype validation for its next-generation OEM semi-solid-state battery technology, achieving 350 Wh/kg and targeting commercial availability in early 2027. The company is also evaluating localized warehousing in Frankfurt, Germany, to provide faster component replacement services to European partners.

About Shenzhen Kangkedi Intelligent Technology Co., Ltd.

Founded in 2024, Shenzhen Kangkedi Intelligent Technology Co., Ltd. (operating internationally as ZFCHUNT) is a specialized manufacturer of new energy solutions and integrated battery systems. Headquartered in Shenzhen with an automated manufacturing base in Dongguan, China, the enterprise empowers the global consumer electronics, telecommunications, and residential construction industries with efficient, durable lithium modules.

Media Contact

Organization: Shenzhen Kangkedi Intelligent Technology Co., Ltd. (Brand: ZFCHUNT)

Contact Person: Chungen Tan

Website: https://www.zfchuntbattery.com/

Email: Send Email

Country:China

Release id:48459

The post ZFCHUNT Launches ZFC-X LiFePO4 Residential Battery Series, Cutting Solar Installer Labor by 15 percent appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

ZFCHUNT Launches ZFC-X LiFePO4 Residential Battery Series, Cutting Solar Installer Labor by 15 percent

Published

on

The plug-and-play home solar battery storage system minimizes SOC discrepancies, helping contractors streamline setups in a market projected to reach $36 billion.

China, 26th Aug 2026 – ZFCHUNT, the global brand of Shenzhen Kangkedi Intelligent Technology Co., Ltd., today launched the ZFC-X Series, a new line of residential energy storage solutions. Engineered with durable LiFePO4 battery cells, the system reduces on-site installation labor by 15 percent and cuts State of Charge (SOC) estimation errors to under 2 percent.

The hardware arrives as Europe tightens building energy codes and U.S. contractors race to claim Inflation Reduction Act (IRA) incentives—both markets where every hour of on-site labor critically impacts project margins.

Key Facts & Technical Specifications

  • Installation Efficiency: Auto-detect CAN/RS485 protocols ensure instant compatibility with major hybrid inverters (SolarEdge, Huawei SUN2000, GoodWe), reducing setup time by up to 15 percent.
  • Durability: Features a 6,000-cycle rating, supporting up to 16 years of typical residential use backed by rigorous cell-screening protocols.
  • Safety Standard: Advanced thermal management minimizes thermal runaway risks during peak load operations.
  • Global Compliance: Fully certified under UL, FCC, CE, RoHS, and PSE standards, maintaining complete UN38.3 logistics documentation.

Core Technology and BMS Innovations

ZFCHUNT engineers its industrial-grade cell technology to minimize discrepancies between BMS software readings and real-world backup capacity. The core battery pack enclosure utilizes active cell-balancing and proprietary algorithms. This ensures that displayed SOC levels correspond more accurately to actual backup duration, reducing the risk of unexpected outages and extending overall cell life.

Streamlined Commercial Portfolio

While the ZFC-X Series focuses on the home energy storage market, ZFCHUNT’s 2,000-square-meter automated facility scales production for broader B2B needs. The company’s unified manufacturing pipeline supplies industrial lithium battery packs for continuous heavy-duty discharge, alongside consumer-grade lithium-ion batteries and OEM battery modules tailored for IoT devices, light green transportation, and telecommunications.

Global Supply Chain and Field Validation

Targeting global distributors and ODM clients, the factory accommodates a standard Minimum Order Quantity (MOQ) of 500 units. Delivery cycles range from 15 to 30 days, with custom samples dispatched within seven days. In recent field trials with European and U.S. installers, the standardized modules proved highly adaptable to diverse grid acceptance standards. Demonstrating a commitment to sustainable partnerships, ZFCHUNT provides detailed installation manuals, remote technical guidance, and a comprehensive three-year material warranty.

Management Quotes

“Most installers spend over three hours per system on inverter handshaking. We have reduced that to five minutes with CAN/RS485 auto-detection,” said Tan Chungen, Technical Manager at ZFCHUNT. “We cut installer labor costs by 15 percent—not just by making cost-effective hardware, but by making smarter systems. For North American and European contractors, where labor is the biggest project variable, that plug-and-play integration is a direct margin protector.”

Industry Background and Future Plans

Driven by global grid decentralization, the residential solar battery storage market is projected to reach $36.2 billion by 2030, according to Grand View Research. To maintain its technical edge, ZFCHUNT has completed A-sample prototype validation for its next-generation OEM semi-solid-state battery technology, achieving 350 Wh/kg and targeting commercial availability in early 2027. The company is also evaluating localized warehousing in Frankfurt, Germany, to provide faster component replacement services to European partners.

About Shenzhen Kangkedi Intelligent Technology Co., Ltd.

Founded in 2024, Shenzhen Kangkedi Intelligent Technology Co., Ltd. (operating internationally as ZFCHUNT) is a specialized manufacturer of new energy solutions and integrated battery systems. Headquartered in Shenzhen with an automated manufacturing base in Dongguan, China, the enterprise empowers the global consumer electronics, telecommunications, and residential construction industries with efficient, durable lithium modules.

Media Contact

Organization: Shenzhen Kangkedi Intelligent Technology Co., Ltd. (Brand: ZFCHUNT)

Contact Person: Chungen Tan

Website: https://www.zfchuntbattery.com/

Email: Send Email

Country:China

Release id:48425

The post ZFCHUNT Launches ZFC-X LiFePO4 Residential Battery Series, Cutting Solar Installer Labor by 15 percent appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

LATEST POST