Connect with us

Press Release

Cloom Tech Introduces Marine Wire Harness Manufacturing for Saltwater-Ready Vessels

Published

on

United States, 19th Aug 2025, Cloom Tech, an electrical interconnect manufacturer with in-house design, prototyping, and compliance support serving automotive, robotics, medical device, and aerospace programs, has introduced a dedicated manufacturing capability for marine wire harnesses intended for saltwater-ready vessels. The initiative establishes defined materials selection, sealed termination methods, and verified routing standards suited to corrosion-prone environments across commercial, recreational, and defense fleets.

Cloom Tech Introduces Marine Wire Harness Manufacturing for Saltwater-Ready Vessels

“This introduction establishes a focused path for harnesses built around marine-grade conductors, seals, and connector systems, with documentation that aligns installation steps to measurable checks,” said Ivy Zhao, spokesperson for Cloom Tech. “The objective is dependable power and signal integrity in saltwater conditions, supported by materials and processes selected for UV exposure, vibration, and intrusion protection.”

The manufacturing scope centers on tinned-copper conductors, abrasion- and UV-resistant jacketing, adhesive-lined heat-shrink, molded boots, and strain-relieved terminations. Connector options include sealed circular, blade, and multi-pin systems with ingress protection ratings specified by application. Overmolding and potting are available for junction points that require additional reinforcement against spray, washdown, and intermittent immersion. Layouts emphasize drip loops, serviceable breakouts, and labeling that supports traceability during commissioning and maintenance.

Design support spans early routing studies through production release. Engineers document bend radii, separation of power and data lines, and provisions for shielding in proximity to motors, radios, sonar, and navigation equipment. Drawings and bills of materials are prepared to mirror procurement and maintenance needs, including spare parts lists and approved alternates where appropriate. For control panels and distributed electrical boxes, harnesses are organized for clear identification and access, reducing time at installation and at subsequent inspection intervals.

Cloom Tech Introduces Marine Wire Harness Manufacturing for Saltwater-Ready Vessels

Qualification and validation steps are integrated into the build process. Continuity and insulation-resistance checks are performed on 100% of harnesses, with pull-test thresholds applied to critical crimps and terminations. Where required, environmental screening can include salt-fog exposure, temperature cycling, and vibration profiles representative of hull and deck locations. Documentation packages may include certificates of compliance, material declarations, and first-article inspection records to support audits and change control.

Production control focuses on repeatability and service readiness. Cut-length accuracy, conductor alignment, and jacket integrity are monitored through in-process checkpoints and final acceptance. Lot coding and serialized labels tie finished harnesses to material batches and test records, aiding field diagnostics. For operators, routing guides and mounting notes are delivered alongside the assemblies to encourage placement that protects against chafe, heat, and pinch points in tight compartments.

The offering is positioned to support boatbuilders, refit yards, and system integrators seeking structured cabling practices between batteries, engines, helm stations, lighting, bilge systems, sensors, communications, and auxiliary equipment. In complex installations, flat and round profiles are mixed to suit conduits, penetrations, and panel backplanes. Attention is given to minimizing EMI pathways and preserving service loops so that components can be removed and replaced without disturbing adjacent circuits.

Cloom Tech Introduces Marine Wire Harness Manufacturing for Saltwater-Ready Vessels

“Future development will examine additional insulation chemistries for extended temperature ranges, expanded connector families with higher ingress protection ratings, and digital build records that map each circuit for lifecycle tracking,” Zhao added. “The roadmap emphasizes pragmatic updates that support reliability, maintainability, and documentation consistency over long service intervals.”

The announcement reflects sustained demand for standardized marine wiring approaches as vessels adopt denser electronics, electrified auxiliaries, and networked control. By combining marine-appropriate materials with measured process controls, the capability aims to provide harnesses that integrate cleanly with established boatbuilding practices while remaining serviceable over multiple seasons in salt and sun.

Cloom Tech operates from 9251 NW 112th Ave, Medley, FL 33178, USA, with support that extends from initial design discussion through production transition. Service scope includes drawing reviews, prototype builds for fit and electrical checks, and scaling guided by documented work instructions. Collaboration with customer engineering teams, yards, and equipment suppliers remains central to aligning interconnect details with overall vessel requirements.

For media inquiries regarding Marine Wire Harness Manufacturing, Cloom Tech may be contacted at +1 863 434 8447 or sales@cloomtech.com.

Media Contact

Organization: Cloom Tech

Contact
Person:
Ivy Zhao

Website:

https://cloomtech.com/

Email:

sales@cloomtech.com

Contact Number: 18634348447

Address:9251 NW 112th Ave

Address 2: Medley, FL 33178

Country:United States

The post
Cloom Tech Introduces Marine Wire Harness Manufacturing for Saltwater-Ready Vessels
appeared first on
Brand News 24.
It is provided by a third-party content
provider. Brand News 24 makes no
warranties or representations in connection with it.

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Just Keepers Responds to Player Needs with Wet Weather Goalkeeper Gloves

Published

on

Hinckley, Leicestershire, United Kingdom, 21st Aug 2025 – Just Keepers Ltd has added a new goalkeeper glove to its collection, designed to perform in wet weather conditions. The release reflects ongoing efforts to provide goalkeepers with equipment that addresses performance challenges faced during adverse playing environments.

The newly added gloves incorporate aqua-focused technology that enhances grip and handling when surfaces are slippery. Through the use of these materials, the gloves aim to maintain consistent performance, even in heavy rain, ensuring that goalkeepers can rely on stability and control when it matters most.

A key consideration in their design has been player feedback, highlighting the need for gloves that remain dependable in challenging match situations. Just Keepers’ addition of wet weather gloves represents a practical response to those requirements, combining durability with specialist features for improved match confidence.

This addition further extends the company’s goalkeeper glove collection, offering solutions that consider the diverse conditions athletes face on the field.

Just Keepers Ltd continues to provide options for goalkeepers of all ages and abilities. The range extends from junior goalie gloves designed for young players taking their first steps in the game, through to professional-level equipment crafted for those competing at the highest standards.

More Information
https://www.just-keepers.com/goalkeeper-gloves/goalie-gloves/uhlsport-gk-gloves/

About Just Keepers Ltd

Just Keepers Ltd is dedicated exclusively to the art of goalkeeping. The company offers a wide selection of gloves, apparel, and specialist gear designed to meet the unique requirements of the position. Serving both aspiring players and experienced professionals, its collection is developed to support goalkeepers at every stage of their journey. With a strong emphasis on performance and reliability, Just Keepers has established itself as a trusted source for those who see goalkeeping as more than a position, but as a discipline in its own right.

Media Contact

Organization: Just Keepers Ltd

Contact Person: Just Keepers Ltd

Website: https://www.just-keepers.com/

Email: Send Email

City: Hinckley, Leicestershire

Country:United Kingdom

Release id:32739

The post Just Keepers Responds to Player Needs with Wet Weather Goalkeeper Gloves appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Quid Miner Launches New Contract, Easily Mining, Earn 1,000 XRP Daily

Published

on

London, UK, 21st August 2025, ZEX PR WIRE, With Bitcoin (BTC) hitting new highs and XRP gaining momentum from ETF optimism and regulatory clarity, investors are looking for stable, hands-off income opportunities. Quid Miner, a UK-registered company active since 2010, answers this demand with a mobile-first cloud mining platform now available in over 180 countries.

Regulation Strengthens Market Confidence

Global policies are shaping a more transparent industry. The US has advanced the CLARITY Act and GENIUS Act, while the EU enforces MiCA, its first comprehensive crypto framework. Pakistan has also launched its Virtual Assets Regulatory Authority (PVARA) to license crypto operations. Together, these measures signal growing confidence in digital assets.

Market Highlights

Bitcoin recently surged past $124,000, buoyed by Fed easing expectations and institutional demand. Analysts see potential toward $150,000 before the next correction. XRP has also rallied nearly 40%, supported by ETF hopes and its adoption in cross-border payments by over 100 banks worldwide.

Quid Miner: Simple, Secure, and Profitable

Quid Miner’s AI-powered mining engine automatically directs hash power to the most profitable coins, supporting BTC, XRP, DOGE, LTC, SOL, BCH, and USDT. Users can start with no hardware or technical skills.

Quid Miner Key Advantages

1.AI-Powered Mining: Smart algorithms automatically adjust across coins and pools for higher efficiency.

2.Advanced Security: Backed by McAfee® and Cloudflare® to safeguard assets and ensure reliable uptime.

3.Multi-Asset Access: Mine BTC, DOGE, XRP, LTC, and other top cryptocurrencies.

4.User Rewards: $15 welcome credit for new accounts, plus referral incentives.

5.Mobile Dashboard: Full control via iOS and Android apps.

Start Mobile Cloud Mining in 3 Simple Steps

1.Sign Up — Register with your email, activate your $15 free plan, and begin earning daily rewards instantly.

2.Access Your Dashboard — Track performance and manage mining directly from your phone.

3.Select a Contract — Choose from flexible plans that fit different budgets and goals.

Sample Mining Plans

BTC Trial Plan: $100 | 2 days | $4/day | Total: $108

DOGE/LTC (Goldshell LT6): $500 | 6 days | $6/day | Total: $536

BTC (WhatsMiner M60S): $3,000 | 15 days | $39.6/day | Total: $3,594

BTC (Avalon A1566): $5,500 | 22 days | $77/day | Total: $7,194

DOGE/LTC (Antminer L7): $8,000 | 27 days | $122.4/day | Total: $11,304

(Returns depend on contract type, duration, and hash power. More options available at https://quidminer.com/ )

Built for a Sustainable Future

Operating globally since 2018, Quid Miner leverages renewable energy, advanced cooling, and 24/7 monitoring to ensure compliance, security, and efficiency.

Conclusion

As regulation matures and crypto leaders like Bitcoin and XRP gain traction, Quid Miner provides investors with a secure, mobile gateway to daily passive income—without the risks of trading or hardware mining.

Email: info@quidminer.org

Official Website: https://www.quidminer.com/

APP download: Click to download the mobile app for Android or Apple

Download the Quid Miner app, claim your $15 bonus, and start earning crypto today.

Disclaimer: The information provided in this press release does not constitute an investment solicitation, nor does it constitute investment advice, financial advice, or trading recommendations. Cryptocurrency mining and staking involve risks and the possibility of losing funds. It is strongly recommended that you perform due diligence before investing or trading in cryptocurrencies and securities, including consulting a professional financial advisor.

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

OCRMedicalForms Launches AI OCR Software to Automate Medical Form Processing

Published

on

OCRMedicalForms.com launches an advanced AI OCR solution that quickly extracts data from medical forms, enabling healthcare providers to save time, improve accuracy, and handle growing workloads without extra staff.

California, United States, 21st Aug 2025OCRMedicalForms.com has announced the launch of its advanced AI-powered OCR platform designed to streamline the processing of medical forms. The software accurately extracts structured data from PDFs, scans, emails, and images, then exports results directly to Excel, Google Sheets, QuickBooks, or ERP systems.

Unlike other solutions that require complex setup, OCRMedicalForms.com works immediately with a wide range of form types. Users can add custom instructions in plain English, upload files from desktops, shared drives, or email, and automate exports to their preferred platforms.

“Our platform helps clinics and healthcare providers cut down hours of manual data entry while maintaining the highest standards of accuracy,” said Amanda Bennett, press contact for OCRMedicalForms.com. “Because it is fully HIPAA compliant, organizations can process sensitive patient data with confidence.”

Healthcare teams and medical offices report major improvements in efficiency. Clinics have reduced manual entry by over 60 percent, freed up staff time for patient care, and eliminated costly data entry errors. Some customers say tasks that once took hours now take only seconds with OCRMedicalForms.com.

Security is at the core of the platform. Data is safeguarded with AES-256 encryption both at rest and during transmission, and all information remains private, never used for AI training.

About OCRMedicalForms.com

OCRMedicalForms.com provides secure AI OCR solutions for healthcare providers and organizations. Built for accuracy, scalability, and privacy, the software helps teams capture and process data from medical forms in seconds, reduce errors, and free up staff to focus on patient care.

Media Contact

Organization: OCRMedicalForms.com

Contact Person: Amanda Bennett

Website: https://www.ocrmedicalforms.com/

Email: Send Email

State: California

Country:United States

Release id:32737

The post OCRMedicalForms Launches AI OCR Software to Automate Medical Form Processing appeared first on King Newswire. This content is provided by a third-party source.. King Newswire makes no warranties or representations in connection with it. King Newswire is a press release distribution agency and does not endorse or verify the claims made in this release. If you have any complaints or copyright concerns related to this article, please contact the company listed in the ‘Media Contact’ section

file

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

LATEST POST